B, C and D edits.

• Select TK and press + 1 All In to move on by one film frame.
• Perform an edit. This will be a B frame (3 field) edit, starting on field 1.
  • If a message appears then click on the Runup offset for B.
  • Repeat the edit until no message appears.
• Select VT and press Cue, then In.
• Inch through the In point and check that the correct film frame lasts for 3 fields.

• Now select TK and press + 1 All In to move on by one film frame.
• Perform an edit. This will be a C frame (2 field) edit starting on field 2.
  • If a message appears then click on the Runup offset for C.
  • Repeat the edit until no message appears.
• Select VT and press Cue, then In.
• Inch through the In point and check that the correct film frame lasts for 2 fields.

• Now select TK and press + 1 All In to move on by one film frame.
• Perform an edit. This will be a D frame (3 field) edit starting on field 2.
  • If a message appears then click on the Runup offset for D.
  • Repeat the edit until no message appears.
• Select VT and press Cue, then In.
• Inch through the In point and check that the correct film frame lasts for 2 fields.
• Close the Edit Setup panel to save the settings.

Do NOT change the telecine Runup or Slip during the setup of B, C and D edits.
Only Runup offset should be changed.