Telecine settings

Store field

This only appears in the 525 Edit Setup panel.
When the telecine runs at 24fps each film frame appears as a sequence of 2 then 3 video fields on the telecine output. This makes 24 film frames into 30 video frames.
The room delay delays this sequence. The store field is a field offset from 0 to 4 that compensates for this delay.

Tk speed override

• Off, this is the normal setting.
• Bump, this is for test purposes only.

Check Tk sync

• Accurate, this is the normal setting. If the telecine is not in sync, then Pogle will stop the edit.
• Rough, normally used for setup purposes only. Error messages will appear, but the edit will continue.