Clicking on parameters in display panels will
assign them to a Control Panel "Softknob" area:
|
|
Any parameters are saved/restored automatically on button 4 next to the "softknob" display area each time Pogle Platinum is shutdown/started.
The buttons 1, 2, 3, SCAN, NOISE, UTIL and NEG that are next to the "softknob" display can be programmed by the user. Press and hold down the required button to assign it a set of knobs. Each user can program their own set.
There are pre-defined sets of parameters assigned to the buttons SCAN,
NOISE, UTIL and NEG these buttons also pop-up
pre-assigned panels as required.
Hold the Alt key down before pressing these buttons to get back to the factory set if they have been re-assigned/saved.