Panels
There are two main type of panels.
-
Setup panels cannot be minimised. These panels are opened by clicking
on the appropriate icon in the Routing display. They can be kept open
during setup, then they are closed.
Pressing the
button
will permanently save the contents of the panel.
-
Status panels are used during a session. They can be minimised by
pressing the button on the top right. When minimised a small icon
appears at the top of the screen, with the panels name. Click on the
icon to see the panel again.
There is also a reset button in the top right corner. This trims the
controls in the panel back to their default.