Press 
in the top right to reset
all four transfer graphs.
Each transfer graph also has it's own reset .
Toggling between 
and 
switches between
"points" mode and "freehand" mode.
In mode, as many points as required may be added and moved
around to create the desired graph. Points can be removed by
pressing the middle button over the point.
In mode, the graph is drawn directly using the mouse or
tablet.
Toggle between 
and 
to create/edit a MegaGamma at the input to or
output from the Pixi/Megadef.
The status on the top right shows the current legal/full settings in the "Pixi Setup" panel.
When black and white are both set to legal, the status will show
"Clip black & white".
When white is legal and black is full, the status will show "Clip
white".
When white is full and black is legal, the status will show "Clip
black".
When both are set to full, the status will show "No Clip".
Press 
to save the current graphs in the current user and
project area.