Pogle Platinum is equipped with a powerful edit controller. This interface can drive the Telecine and up to four VTRs. Any VTR can be selected to be a Recorder or a Player (such as an audio deck)
Multiple transports can be controlled by the Platinum editor.
All the transport functions of all the decks are located on the Transport Control Panel
The buttons marked TK and VTR 1-4 control the Telecine and the deck connected to the VTR port. Icons at the bottom right of the Platinum system bar provide visual feedback of the status and frame rate of each transport.
The Buttons below TK and VTR control the relevant deck. The functions are play fwd/rev, fast fwd/rev, inch fwd/rev and stop. The wheel to the left of the buttons gives jog and shuttle control of the decks (where supported). Additional functions are available.
Numeric entry (of timecodes etc) is available on the numeric keypad, and finally, the buttons to the right of the numbers allow edits to be set up.