DCP 1

DCP 1 Primary control

DCP 1 primary controls are available when all the balls are red. If any balls are green, then press and hold the left button above the lower ball until they change. If the balls are now orange then press the 1 key on the DCP panel. Now the balls will be red. Lift gamma and gain controls are now available. These controls will affect the entire picture area.

Copying DCP 1 primary from another event.

• Hit Up or Down to select the event that has the desired correction.
• Press the illuminated key labelled SECONDARY.
• Press the left button above the lower ball on the trackerball panel.
  Now all the DCP 1 primary will be merged with the current event.
• Press ENTER to update this into the list.

Reading DCP 1 primary from a note.

• Read the note that has the desired correction.
• Press the illuminated key labelled SECONDARY.
• Press the left button above the lower ball on the trackerball panel.
  Now all the DCP 1 primary will be merged with the current event.
• Press ENTER to update this into the list.