DCP 1 Six Vector Secondary

Six variable vectors exist for the DCP 1 secondary, these are selected using the R, G, B, Y, C and M keys. The hue, saturation and luminance within the selected vector can be adjusted using the three controls on the upper left hand side of the DCP panel. The vector position can be rotated through 360 degrees using the top control on the right of the DCP panel. The vector width can be altered in eight steps using the second control on the right of the DCP panel.

DCP 1 Black & White Desaturation

White desaturation is available on the third control on the right of the DCP panel. Black desaturation is available on the fourth control on the right of the DCP panel.

DCP 1 Master Hue/ Master Saturation/ Master Luminance

Master hue is available on the fifth control on the right of the DCP panel.
Master saturation is available on the sixth control on the right of the DCP panel.
Master luminance is available on the seventh control on the right of the DCP panel.

Copying all DCP 1 channels from another event.

• Hit Up or Down to select the event that has the desired correction.
• Press the illuminated key labelled SECONDARY.
• Press the DCP1 key on the DCP panel.
  Now all six DCP1 channels will be merged with the current event.
• Press ENTER to update this into the list.

Reading all DCP 1 channels from a note.

• Read the note that has the desired correction.
• Press the illuminated key labelled SECONDARY.
• Press the DCP1 key on the DCP panel.
• Now all six DCP1 channels will be merged with the current event.
• Press ENTER to update this into the list.