Data transfer
-
Select Data mode in Platinum data panel.
-
Set resolution on the Spirit remote panel.
-
Set file path on the TransferView program.
-
Ensure that the correct varispeed (3-6fps) is set in the Platinum
transport panel.
-
Set telecine preroll to 3 seconds.
-
Mark In point on telecine.
-
Mark Out point, if required.
-
Make telecine a Player.
-
Make all vtrs Wild.
-
Hit Perform.
Do not turn on Vari, this will be set automatically during the transfer.
This will make the preroll time longer.
Normally the data mode and transfer button should not be touched.
They will be set automatically by the Platinum.
Data playback
Select VTR1 and use the transport keys to playback the
material.